Overhead Crane End Beam For Travelling
Brief introduction of overhead crane end beam for travelling:
1.Suitable to kinds of single and double girder overhead crane 1t-20t,span length is 7.5m-22.5m,
2.The girder can connect with end carrriage by welding or strength bolts,we can leave the bolt hole according to clients' demands.
3.According to the wheel pressure,our end carriage adopt different size wheel from 150-500mm diameter..Our wheel is with the character of wear resistance.
4.Driving mechanism adopt three in one driving mechanism,
5.We produce as demands from clients.
Safety features of overhead crane end beam:
Weight overload protection device,top quality long time bearing polyurethane materials buffer,crane travelling limit switch,voltage lower protection function,emergency stop system,current overload protection system and so on.
Control method:Cabin or remote control or both,
Design and construction rules:All the standards which is required for the crane is the Chinese standard.
Painting of overhead crane end beam:
Primer and finishing paint,
Color:According to your demand,
Average thickness:About 100 microns,
Service:Design,manufacture,quality assurance,test,after sale service,and we could provide turn-key installation as your demand.
Workshop of overhead crane end beam:
The details of overhead crane end beam:
User information:
The basic parameters should be informed by the users,for the capacity,lifting speed,span length of main girder,and the size of the rails,welcome to contact us by email or online,you will receive our prompt and careful reply.
|
|
Overhead Crane End Beam For Travelling Images
|
